If your Canon TR4722 setup failed, don’t panic.
This is one of the most common problems users face while installing the Canon PIXMA TR4722 for the first time. Sometimes the printer is not detected. Sometimes the driver installation freezes. Other times the setup completes but the printer does not respond.
The good news? In most cases, the printer isn’t broken.
At Printer Offline Fix, we troubleshoot Canon installation problems daily. Setup failures are usually caused by network issues, driver conflicts, firewall restrictions, or incomplete software installation.
This step-by-step guide will help you fix the problem properly — not temporarily.
Let’s start with the basics.
Why Did My Canon TR4722 Setup Fail?
A Canon TR4722 setup usually fails due to one of these reasons:
- Weak or unstable WiFi connection
- Incorrect network password
- Driver installation error
- Firewall or antivirus blocking setup
- Windows permissions issue
- Printer not in wireless setup mode
- Outdated firmware
Most failures are software-related, not hardware defects.
Step 1: Restart Everything First
Before trying advanced fixes, restart:
- Printer
- Router
- Computer
Wait 60 seconds after turning off the router before powering it back on.
This clears temporary network conflicts.
Then try the setup again.
If it still fails, continue below.
Step 2: Check If ij.start.canon/TR4722 Is Working
Your Canon TR4722 setup depends on downloading the correct driver.
Open your browser and visit:
ij.start.canon
Search for TR4722.
If the website does not load:
- Clear browser cache
- Try Chrome or Edge
- Disable VPN
- Restart router
Make sure you are downloading the correct driver for your operating system.
Using the wrong version can cause installation failure.
Step 3: Remove Old Canon Drivers Completely
One of the biggest reasons Canon TR4722 setup fails is leftover drivers from a previous attempt.
To remove them:
- Open Control Panel
- Go to Devices and Printers
- Remove Canon TR4722 (if listed)
- Open Programs and Features
- Uninstall Canon printer software
Restart your computer.
Now reinstall the driver fresh from ij.start.canon/TR4722.
Clean installation prevents conflicts.
Step 4: Make Sure the Printer Is in Wireless Setup Mode
If your printer is not in setup mode, your computer will not detect it.
To reset wireless mode:
- Turn printer ON
- Press and hold the Wireless button
- Wait for the WiFi light to blink
Now run the installer again.
If the printer is not blinking, it is not in pairing mode.
Step 5: Check Your WiFi Connection
A weak network is a major cause of setup failure.
Make sure:
- Printer is near the router
- You are entering the correct password
- You are not using a guest network
- Router signal is stable
If possible, temporarily move the printer closer to the router.
A stable WiFi connection is critical during setup.
Step 6: Temporarily Disable Firewall or Antivirus
Security software often blocks printer installation.
If your Canon TR4722 setup freezes during installation:
- Disable antivirus temporarily
- Turn off firewall briefly
- Run installer as Administrator
After installation completes, turn security software back on.
This solves many silent installation failures.
Step 7: Run the Installer as Administrator
On Windows 10 or Windows 11:
Right-click the setup file.
Click “Run as Administrator.”
Windows security sometimes prevents driver installation without elevated permission.
Especially on Windows 11.
Step 8: Try USB Setup First
If wireless setup keeps failing, use a USB cable temporarily.
Steps:
- Connect printer to computer using USB cable
- Run setup installer
- Complete installation
- Switch to wireless mode after setup
This method bypasses WiFi detection problems.
Many users find this easier.
Step 9: Reset the Canon TR4722 Printer
If previous attempts failed multiple times, reset the printer.
To factory reset:
- Turn printer ON
- Press Stop button repeatedly
- Access setup menu
- Select Reset Settings
- Confirm
After reset, repeat wireless setup from scratch.
Reset clears corrupted network memory.
Step 10: Check Windows Network Settings
Sometimes the issue is not the printer — it’s your computer.
Check:
- Network profile set to Private
- No proxy enabled
- Windows updated
- No VPN active
Public network profiles block printer discovery.
Switch to Private network.
Step 11: Check for IP Address Conflicts
If setup completes but printer shows offline:
Your router may have assigned a new IP address.
Assign a static IP to prevent future conflicts.
Static IP keeps communication stable.
This prevents future setup-related connectivity issues.
Canon TR4722 Setup Failed on Windows 11?
Windows 11 has stricter security rules.
If setup fails:
- Update Windows fully
- Remove old drivers
- Run installer as Administrator
- Set network to Private
- Disable Defender temporarily
Windows 11 driver conflicts are common but fixable.
Canon TR4722 Setup Failed on Mac?
For Mac users:
- Download macOS driver only
- Remove previous Canon printer entries
- Add printer manually in System Settings
- Use IP address method if needed
Mac firewall can also block discovery.
Allow printer communication in settings.
When Setup Completes but Printer Doesn’t Print
If installation succeeds but nothing prints:
Open:
Control Panel → Devices and Printers
Check:
- Canon TR4722 set as Default Printer
- “Use Printer Offline” unchecked
- No stuck print jobs
Restart Print Spooler if needed.
Common Error Messages During Setup
You may see:
- Printer not detected
- Driver installation failed
- Network connection error
- Setup cannot continue
These errors usually mean:
- Network interruption
- Firewall blocking
- Corrupted download
- Incorrect WiFi password
Fix the root cause, not just restart devices.
How to Avoid Setup Failure in the Future
To prevent Canon TR4722 setup from failing again:
- Keep drivers updated
- Use stable WiFi
- Avoid frequent router resets
- Assign static IP
- Do not interrupt installation
Small preventive steps save future frustration.
When to Seek Professional Help
If your Canon TR4722 setup keeps failing after:
- Resetting printer
- Reinstalling drivers
- Checking WiFi
- Disabling firewall
Then deeper network troubleshooting may be required.
Some routers block printer communication due to advanced security settings.
Professional remote diagnostics can identify hidden conflicts quickly.
Final Thoughts
If your Canon TR4722 setup failed, remember this:
Most installation failures are configuration problems — not hardware defects.
The most common causes are:
- Network instability
- Driver conflicts
- Firewall interference
- Incorrect wireless setup
- Windows permission issues
Follow the steps carefully. Remove old drivers. Restart properly. Use official downloads from ij.start.canon/TR4722.
With a clean installation and stable network, the Canon PIXMA TR4722 usually installs smoothly.
And once it’s configured correctly, it performs reliably for printing, scanning, and copying.
